TURN BUTTON 2 HOLE BASE STANDARD
This is the most common 2 hole turn button. Made from high qaulity nickle plated brass.
Positive turnable lock. Often used to fasten boat canopies,spray hoods and covers.
The single height turn button is to be used with the other turn button parts (eyelet and washer)
to form a complete fabric to wood/metal assembly.
Fabric to wood/metal instructions for use.
Secure the single or double height turn button firmly in place by inserting self tapping screws (screws not provided)
through the two fixing holes and into the wood,metal or fiberglass.Once positioned and fixed in teh correct place,
offer up the material to the turn button and mark the centre . The waser can be template, mark around the washer
and carefully cut out the material.
Also mark and cut four slits for the eyelet prongs to pass through.
Sandwich the material between the eyelet and the washer ensuring the eyelet is on front and the washer is on the back.
Make sure the indents on the washer are facing side down to take the prongs when bent.
Firmlybend over prong using a flat head screw driver.
