The plastic strainer filter element insert is suitable for use with hull mounted water strainers. The elements are changed easily through a screw on threaded cap. This strainer element fits the 3/4" BSP strainer

The plastic strainer filter element insert is suitable for use with hull mounted water strainers. The elements are changed easily through a screw-on threaded cap. This strainer element fits hull mounted strainers: 1-1/4" BSP and 1-1/2" BSP

The plastic strainer filter element insert is suitable for use with hull mounted water strainers. The elements are changed easily through a screw on threaded cap. This strainer element fits the 1/2" BSP strainer

The stainless steel strainer filter element insert is suitable for use with hull mounted water strainers. The elements are changed easily through a removable wingnut cap. This strainer element fits the Seaflow hull mounted strainer  that has a 1" BSP thread.

The stainless steel strainer filter element insert is suitable for use with hull mounted water strainers. The elements are changed easily through a removable wingnut cap. This strainer element fits the Seaflow hull mounted strainer 

The stainless steel strainer filter element insert is suitable for use with hull mounted water strainers. The elements are changed easily through a removable wingnut cap. This strainer element fits the Seaflow hull mounted strainer 

The stainless steel strainer filter element insert is suitable for use with hull mounted water strainers. The elements are changed easily through a removable wingnut cap. This strainer element fits the Seaflow hull mounted strainer 

The stainless steel strainer filter element insert is suitable for use with hull mounted water strainers. The elements are changed easily through a removable wingnut cap. This strainer element fits the Seaflow hull mounted strainer 

THIS IS A GENUINE HOSE USED ON BMC ENGINES, MADE OUT OF A HIGH TEMPERATURE TOLERANT EPDM RUBBER SUTIABLE FOR BMC 1.5, 1.8, 2.2, 2.5

MAIN HOSE IS 32MM (1 1/4") ID

THE TAKE OFF HOSE IS 13MM (1/2") ID

TEMPERATURE RANGE -50 DEGREE TO 200 DEGREE C

THIS HOSE IS OFTEN FOUND FITTED BETWEEN THE ENGINE CIRCULATION PUMP AND THE HEAT EXCHANGER TANK. THE 13MM TAKE OFF PIPE IS THEN PIPED TO THE CALORIFIER TANK (FOR HOT WATER TO THE DOMESTIC TAPS ONBOARD)

OR COULD BE USED TO FEED A WARM AIR CABIN HEATER MATRIX 

ORIGIONALLY MANUFACTURED BY UNIPART UK

Exhaust muffler for water-cooled engines 55/60/65MM

As well as reducing the amount of noise emitted by the exhaust system, once the engine has been stopped, a waterlock will make sure that water will not run back in to the engine.

SUITABLE FOR EXHAUST HOSE 55/60/65

CAPACITY 20 LITRES

OPERATING PRESSURE MAX 115 HP

LENGTH 660MM

WIDTH 220MM

HEIGHT 320MM